Metrel A-1532XA EVSE AC Adaptor

It is intended for testing Mode 3 EV supply equipment with a type 2 connector. XA version supports 3 phase load testing up to 13 A and different error types, including PE open. If used together with Metrel AutoSequences®, prebuilt in the newer multifunctional testers, the complete EVSE charging station can be tested (state-by-state) electrically and functionally with a push of a button. It is possible to create a professional station-based report with MESM.

It’s an excellent accessory to Metrel installation testers like the MI3152 and MI3155 as this will add comprehensive EVSE testing capability.

Features:

• Banana socket outputs for connection to a 3-phase installation tester
• Voltage indicators on EVSE output
• Proximity Pilot resistance selector for simulation of EV cable presence and current rating detection
• Control Pilot resistance selector for simulation of electric vehicle status
• Socket output for connection to a 1-phase installation tester (Phase 1, Neutral, PE)
• Type 2 Male Plug connector for connection to EVSE
• 6 mA EV RCD support
• Functional tests support
• EVSE AUTO SEQUENCE® support
• MESM report creation
• Load testing up to 13 A on socket – 1 phase or on banana sockets – 3 phase
• Fault simulation of Diode short, PE-CP short and PE open

 
Output BNC connector for CP signal monitoring.

* Functional tests and AUTO SEQUENCE® are supported only on the MI 3155t XD and MI 3152 XC testers

* Report printing is only available via the MESM PC SW. The MESM license (P 1101) is to be purchased separately.